Verilink 8100A (34-00237) Product Manual - Manual (Page 79)

C o n f i g u r a t i o n 4-5
WAN Configuration Menu
Configuring the IAD for voice transmissions across the WAN involves several
tasks. Tasks in this chapter are described beginning at the WAN
Configuration menu, which varies based on the WAN interface and datalink
protocol.
Figure 4.2 WAN Configuration Menu - Configuring SDSL
Figure 4.3 WAN Configuration Menu (ATM) - Configuring T1/E1
6 T1/E1, SDSL, or
USI with Frame
Relay 1. Configure T1/E1 (page 4-11), or configure SDSL (page 4-7), or
configure USI (page 4-21)
2. Set the datalink protocol to Frame Relay (page 4-22)
3. Configure DLCIs (page 4-31)
4. Configure Frame Relay options (page 4-34)
5. Configure the voice path (page 4-60))
T1/E1, SDSL,
ADSL,
SHDSL with
ATM 1. Configure T1/E1 (page 4-11), or configure SDSL (page 4-7), or
configure ADSL (page 4-19), or configure SHDSL (page 4-20)
2. Set the datalink protocol to ATM (page 4-22)
3. Configure PVCs (page 4-24)
4. Configure ATM (page 4-30)
5. Configure the voice path (page 4-60)