Verilink 8100A (34-00237) Product Manual - Manual (Page 199)

R e p o r t s 5-15
Display DLCI Statistics
To display the DLCI Statistics (Data Link Connection Identifier) report, Type
“D”
on the Interface Statistics menu shown in Figure 5.4.
This option is displayed only when Frame Relay is selected as the data link
protocol.
Sent Packet Information
packets sent No. of packet sent from this interface
discarded for lack of
resources Discarded transmitted packets due to lack of packet
buffers
discarded due to internal
errors Discarded transmitted packets due to internal software
errors, such as lack of packet buffer
discarded for other reasons Discarded transmitted packets due to other reasons,
such as lack of packet buffer
Packets Received by Type
octects rcvd Total octets/bytes received from interface
unicast rcvd No. of Unicast Packets received from interface
multicast rcvd No. of Multicast Packets received from interface
broadcast rcvd No. of Broadcast Packets received from interface
Packets Sent by Type
octects sent Total octets/bytes sent from interface
unicast sent No. of Unicast Packets sent from interface
multicast sent No. of Multicast Packets sent from interface
broadcast sent No. of Broadcast Packets sent from interface
Parameter Description
Committed Burst No. of committed info rate (bytes per measurement
interval)
Excess Burst No. of excess info rate (bytes per measurement
interval)
Throughput Expected average throughput (bytes/second)
Received Frame Information
Rx Frames No. of frames received
Rx Bytes Total data received in bytes
Parameter Description