Verilink 8100A (34-00237) Product Manual - Manual (Page 197)

R e p o r t s 5-13
Figure 5.3 Clear Network Statistics Menu
To permanently reset statistics for a specific protocol, type the option. The
IAD immediately resets all statistics for the specified protocol, and displays
the menu.
Continue resetting network statistics, or press Escape to return to the Network
Statistics menu.
Interface Statistics Reports
Type “I” on the Reports menu to display information about the packets
handled between layer 2 and layer 3 on a per-port basis, and to clear statistics
for specific protocols.
To display specific interface statistics, follow the steps below.
1 After typing “I” on the Reports menu, depending on how the IAD is
configured, the IAD displays the interfaces from which you may choose.
2 Select an interface. The IAD displays the port table and prompts you to
select a port.
3 Type the port number and press Enter. The IAD displays the Interface
Statistics menu:
NOTICE: The commands that display on the Interface Statistics menu vary, based
on the WAN module and configuration of the IAD.