Verilink 8100A (34-00237) Product Manual - Manual (Page 86)

4-12 8 0 0 0 S e r i e s
Figure 4.14 T1 Configuration Menu
The top part of the menu displays the current configuration. You can change
the configuration by selecting the appropriate option in accordance with the
details provided below for each option. Remember always to reset the IAD
when you finish T1 configuration.
Select Frame Mode (D4
or ESF)
To select the Frame Mode, follow the steps below.
1 Type “1” on the T1 Configuration menu (Figure 4.14) to select Frame
Mode (D4 or ESF) and display the T1 Frame Mode menu:
Figure 4.15 Select T1 Frame Mode Menu
2 Type “1” to select ESF Frame Mode, or “2” to select D4 Frame mode.
The IAD resets the interface and redisplays the T1 Frame Mode menu.
3 Press Escape to return to the T1 Configuration menu.
4 Continue with other configuration tasks.
Select Transmit Line
Build Out
To select Line Build Out, follow the steps below.
1 Type “2” on the T1 Configuration menu (Figure 4.14) to display the Line
Build Out menu.