Verilink 8100A (34-00237) Product Manual User Manual
Page 230
6-10
8 0 0 0 S e r i e s
set nat server
add
Configures the NAT local server.
set nat server add <index> <local-ip-address>
(ESP|AH|((TCP|UDP) <local-port> <network-port>))
index
Index used on the NAT server table.
local-ip-address
Local IP address.
ESP | AH | TCP | UDP
Protocol used for traffic across the NAT port.
local-port
Local IP port.
network-port
Port on the server that defines which TCP or UDP port is used.
set nat server
remove
Removes the NAT server.
set nat server remove <index>
index
Index used on the NAT server table.
set password
Sets the password for the IAD.
set password (user | netman | supervisor) <password>
user | netman | supervisor
Password level.
password
Password for the IAD.
set pots admin
Sets the administration status of the POTS ports as set in the SIP
configuration menu.
set pots admin (<port>|all) (off|on)
port |all
Selects which POTS ports to change.
off | on
Disables (off) or enables (on) the port.
set pots gain
Changes the gain on the POTS port.
set pots gain (<port>|all) (tx|rx) <gain-in-dB>
port | all
Selects which POTS ports to change.
tx | rx
Sets transmit or receive gain for the POTS port.