Verilink 8100A (34-00237) Product Manual - Manual (Page 33)

I n t r o d u c t i o n 1-7
• Compatible with standards-based IP, ATM, and Frame Relay WAN
protocols
• Interworking feature allows Frame Relay and ATM networks to exchange
data using either FRF.5 or FRF.8 protocol
• Provides RJ-21 POTS interface with Loop Start or Ground Start
• USI supports V.35 and EIA-530
• Provides dynamic and static IP routing and bridging capabilities
• Provides firewall support via IP filtering
•
Offers DHCP and NAT to support IP address management
•
Supports MGCP and SIP with the flexibility to support TDM/VoATM/VoIP
applications all in one unit
• Provides management capabilities including Telnet, SNMP, and TFTP
The High POTS Ports are characterized by their different WAN interfaces:
• 8216s/8224s
− provides voice services and high-speed Internet or corporate
connectivity over T1 or E1.
• 8316s/8324s
− provides voice services and high-speed Internet or corporate
connectivity over SDSL.
• 8512s/8516s/8524s
− provides voice services and high-speed Internet or
corporate connectivity over SHDSL.
High POTS Port Front Panel LED Status Indicators
The High POTS Port front panels contain seven LED status indicators. Each
is described in the table below.
Figure 1.7 High POTS Port Front Panel
LED Description
POWER Illuminates when the IAD is powered on.
LAN LINK Illuminates when there is an operational LAN connection on the
Ethernet port.
LAN Activity Flashes when there is activity on the Ethernet port.
WAN Link Flashes as the IAD is establishing a link, and illuminates solid
when there is a proper connection on the WAN port and
synchronization has been achieved.
VOICE Illuminates when there is activity on the voice ports. Remains lit
when connected to a Jetstream Voice Gateway, and blinks when
there is activity.