Verilink 8100A (34-00237) Product Manual - Manual (Page 226)

6-6 8 0 0 0 S e r i e s
set dhcp server
range
Sets the DHCP server low and high IP address range.
set dhcp server range <low-ip-address>
<high-ip-address>
low-ip-address
IP address in decimal format (999.999.999.999).
high-ip-address
IP address in decimal format (999.999.999.999).
set dhcp server
subnet
Sets the DHCP server default subnet mask.
set dhcp server subnet <default-subnet-mask>
default-subnet-mask
Default subnet mask in decimal format (255.255.255.255).
set dns server
address
Sets the DNS primary server IP address.
set dns server address <ip-address>
ip-address
IP address in decimal format (999.999.999.999).
set dns server
address2
Sets the DNS secondary server IP address.
set dns server address <ip-address>
ip-address
IP address in decimal format (999.999.999.999)
set domain Sets the domain name of the network to which the IAD is connected.
set domain <name>
set encoding Sets the type of line encoding used on the T1 network port.
set encoding (ami|b8zs) [<slot>]
ami | b8zs
Line encoding allows ami or b8zs
set framing Sets type of framing for the T1 network.
set framing (esf|d4) [<slot>]
esf | d4
Allows ESF or D4 framing
set hostname Sets the hostname of the IAD.
set hostname <name>
set ip default
interface
Sets the IP router to send packets to the specified interface if no other route
applies.