Verilink 8100A (34-00237) Product Manual - Manual (Page 227)

C o m m a n d L i n e I n t e r f a c e 6-7
set ip default interface [<slot> [<interface>
[<port>]]]
set ip default
route
Sets the default IP address.
set ip default route <ip-address>
ip-address
IP address in decimal format (999.999.999.999).
set ip route Sets a static IP route.
set ip route <ip-route> <net-mask>
<gateway-ip-address>
ip-route
IP address in decimal format (999.999.999.999).
net-mask
Subnet mask in decimal format (255.255.255.255).
gateway-ip-address
IP address in decimal format (999.999.999.999).
set jitter Sets inter-arrival jitter delay.
set jitter (<static-ms>|(dynamic <initial-ms>
<max-ms>))
static-ms | initial-ms | max-ms
Values are in milliseconds.
set lan bridge Enables or disables bridging on a LAN port.
set lan bridge (off|on) [<slot> [<interface>
[<port>]]]
off | on
Keyword to disable (off) or enable (on) bridging on the specified port.
set lan ip
address
Sets the LAN IP address. If you do not enter any optional parameters, the
IAD sets the address on the first available slot, interface, port and connection.
set lan ip address <ip-address> <net-mask> [priority]
[<slot> [<interface> [<port> [<connection>]]]]
ip-address
IP address in decimal format (999.999.999.999)
net-mask
Subnet mask in decimal format (255.255.255.255)
set lan rip Enables or disables RIP on a LAN IP port. If you do not enter any optional
parameters, the IAD performs the command against the first available slot,
interface and port.