Verilink 8100A (34-00237) Product Manual - Manual (Page 52)

3-2 8 0 0 0 S e r i e s
To maintain IAD security, a user with Supervisor privileges should modify
the User security level user ID and passwords for both User level and
Network Administrator level prior to placing the IAD into production.
The table below lists the default values for the user IDs and passwords:
The user ID and password may contain up to 17 alphanumeric characters.
These values are case sensitive; spaces and punctuation characters are not
allowed.
The IAD can store only one user ID and password at each security level.
Password Configuration Menu
To access the Password Configuration menu, type “8” (Configure Login) on
the Main menu.
Security level Privileges
Supervisor This user level is the highest level. Users who log in as
Supervisor have full access to all IAD features (menu
and command line interface, including changing User
security level, user ID, and any level passwords, plus
complete IAD configuration capability.
Network Administrator At this level, users may perform tasks that alter the
network settings of the IAD, plus are able to access to all
data networking configuration menus, and can update
routing and bridging information and status.
This user can change the password at this level, and also
can change the User-level User ID and password, and
can access all display-only menus.
At this level, users cannot modify WAN or LAN
settings, alter derived timing, use the Command Line
Interface, or modify voicepath settings.
User At this level, the user has access to display-only menus,
and can view the current configuration, interface, and
media statistics, routing and bridging information, and
status. The user may change this level User ID and
password, but cannot make or save any changes to the
configuration of the IAD.
Security Level User ID Password
User <Enter> <Enter>
Network
Administrator NetMan <Enter>
Supervisor Supervisor supervisor