Verilink 8100A (34-00237) Product Manual - Manual (Page 231)

C o m m a n d L i n e I n t e r f a c e 6-11
gain-in-dB
Gain value in decibels. The values range from
−9 to +3 dB.
set radius secret Changes the primary or secondary RADIUS encryption key.
set radius secret (1|2) <secret>
1 | 2
Allows primary for 1 or secondary for 2.
secret
RADIUS encryption key.
set radius server Programs the address of the RADIUS server. (Use to determine the validity of
unknown user ID/password pairs in the IAD. Verilink does not provide a
RADIUS server; user must provide a RADIUS server to use this feature.)
set radius server (1|2) <ip-address>
1 | 2
Allows primary for 1 or secondary for 2.
ip-address
IP address of RADIUS server.
set sdsl speed Sets the SDSL speed. This command sets the speed to manual framed (Nokia)
or Auto Cycle (Nokia).
set sdsl speed <speed> (auto|manual)
speed
Keyword identifying speed: 2320 | 1744 | 1536 | 1152 | 768 | 384 | 192.
auto | manual
Keyword identifying manual or auto cycle for Nokia.
set snmp comm Sets the SNMP community name for the specified access level.
set snmp comm (ro|rw) <name>
ro | rw
Keyword for community access level: ro
− read-only, rw − read-write.
name
New name for the community.
set snmp enable Enables or disables SNMP over the specified access method.
set snmp enable (off|on)(IP|EOC|Both)[default]
off | on
Keyword to disable (off) or enable (on) SNMP over the specified access
method.
IP | EOC | Both
Keyword for the access method.
default