Grass Valley EDIUS Neo 3 - Manual (Page 360)

358 EDIUS NEO — User Reference Guide
Section 5 — Timeline Operations
Figure 402. Disabled Clip on the Timeline
Note If a clip is linked or grouped with other clips, you may choose to enable/
disable only the selected clip or to enable/disable only the video or audio
portion of a clip with both video and audio. To enable only a single clip or a
portion of a clip, select the portion of the clip/group to be enabled, right-click
on the selected portion and select Enable/Disable from the menu. All other
clips or portions of the clip are disabled.
Figure 403 shows an example of
only the video portion of one clip in a group enabled.
Figure 403. Video Only Enabled in a Clip Group
Deleting a Clip
To delete a clip from the Timeline, select the clip and click the Delete button
(highlighted in blue in Figure 404 ) on the Timeline.
Figure 404. Timeline Delete Button
Note The result of the delete operation by any method differs depending upon the
editing mode. For more information see Ripple Mode
on page 285 .