Grass Valley EDIUS Neo 3 - Manual (Page 397)

EDIUS NEO — User Reference Guide 395
Timeline Clip Operations
From the drop-down list, select the desired display area as indicated in
Figure 448 :
• Underscan Area
• Overscan Area
• Title Safe Area
The position selection button (or X, Y and Z coordinates) in this example
positions the image in the upper left of the Titlesafe image display area.
Note The image does not fill the titlesafe area as the Z value has been set to 20
which makes the image appear farther away on the Z axis.
Figure 448. Layouter Image Display Area Selection 3D Position
The circle circumscribes the position location.
Note The blue circle only appears when the cursor is placed on the blue Z Axis
control point.
3D Anchor Point
The anchor values designate the X,Y and Z position of the anchor point of
the image display in the Preview window relative to its position coordi-
nates.
In Figure 449 , the anchor point has been adjusted by -20% on the X axis, -
20% (216 pixels in this case) on the Y axis and -20% on the Z axis.