Yaskawa Sigma-5 User Manual: Operation of Digital Operator User Manual

Page 127

Advertising
background image

3.2 Operations

3-93

9

head1

3

Utility Function Mode

6

When the detection processing is success-

fully completed, “Measure” stops flashing

and the results and the notch filter value to

be set are displayed. If the processing was

not completed, “No Measure” is displayed.

To check the results, go to step 8.

< Important >

If two seconds or more are required for the

operation although detection was success-

fully completed, the detection accuracy

might be insufficient. Increasing reference

amplitude more than 15 increases the

detection accuracy, but the vibration and

noise from the machine will increase.

Increase the amplitude value little by little.

Notes:

• If a notch filter has been set and is being

used, “*” is displayed on the second

line.

• If the first stage notch filter has been set,

the second stage notch filter value is dis-

played. If the first and second stage

notch filters have been set, only the

result of frequency detection is dis-

played.

7

To exit the EasyFFT function at this stage,
press the

Key. The power to the ser-

vomotor is turned OFF and the display

returns to the utility function mode main

menu.

To remeasure the vibration frequency,
press the

Key to return to step 4.

Execute steps 5 to 7.

8

Press the

Key after the normal com-

pletion of frequency detection. The notch

filter frequencies are automatically updated

to the optimum values.

The status display shows “DONE” and the

display shown on the left appears.

If the first stage notch filter frequency has

been set (Pn408.0 = 1), the second stage

notch filter frequency (Pn 40C) will auto-

matically be updated.

Notes:

• If the first stage or the second stage

notch filter frequency has already been

set (Pn408

= n.†1†1), the notch filter

frequency cannot be set.

• If the frequency detected by this func-

tion is not used, set the notch filter to be

invalid (Pn408.0

= 0).

(cont’d)

Step

Display after Operation

Keys

Operation

㧮㧮ޓޓޓޓޓ㧙㧱㨍㨟㨥ޓ㧲㧲㨀㧙
㧾㨑㨟㨡㨘㨠
㧵㨚㨜㨡㨠ޓ㧩ޓ㧜㧝㧡ޓ㧑
㧾㨑㨟ޓ㧩ޓޓޓ㧝㧞㧡㧜ޓ㧴㨦
㧲㨕㨘㨠㨑㨞㧝ޓ㧝㧟㧣㧡ޓ㧴㨦

㧮㧮ޓޓޓޓޓ㧙㧱㨍㨟㨥ޓ㧲㧲㨀㧙
㧾㨑㨍㨐㨥
㧵㨚㨜㨡㨠ޓ㧩ޓ㧜㧝㧡㧑

㧰㧻㧺㧱ޓޓޓ㧙㧱㨍㨟㨥ޓ㧲㧲㨀㧙
㧾㨑㨟㨡㨘㨠
㧵㨚㨜㨡㨠ޓ㧩ޓ㧜㧝㧡ޓ㧑
㧾㨑㨟ޓ㧩ޓޓޓ㧝㧞㧡㧜ޓ㧴㨦
㧲㨕㨘㨠㨑㨞㧝ޓ㧝㧞㧡㧜ޓ㧴㨦

Advertising