Yaskawa Sigma-5 User Manual: Operation of Digital Operator - Manual (Page 9)

ix
„ Storage and Transportation
„ Installation
CAUTION
• Do not store or install the product in the following places.
Failure to observe this caution may result in fire, electric shock, or damage to the equip-
ment.
• Locations subject to direct sunlight
• Locations subject to temperatures outside the range specified in the storage or installa-
tion temperature conditions
• Locations subject to humidity outside the range specified in the storage or installation
humidity conditions
• Locations subject to condensation as the result of extreme changes in temperature
• Locations subject to corrosive or flammable gases
• Locations subject to dust, salts, or iron dust
• Locations subject to exposure to water, oil, or chemicals
• Locations subject to shock or vibration
• Do not hold the product by the cables or motor shaft, or encoder while transport-
ing it.
Failure to observe this caution may result in injury or malfunction.
• Do not place any load exceeding the limit specified on the packing box.
Failure to observe this caution may result in injury or malfunction.
• If disinfectants or insecticides must be used to treat packing materials such as
wooden frames, pallets, or plywood, the packing materials must be treated before
the product is packaged, and methods other than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core temperature of
56
°
C for 30 minutes or more.
If the electronic products, which include stand-alone products and products installed in
machines, are packed with fumigated wooden materials, the electrical components may be
greatly damaged by the gases or fumes resulting from the fumigation process. In particu-
lar, disinfectants containing halogen, which includes chlorine, fluorine, bromine, or iodine
can contribute to the erosion of the capacitors.
CAUTION
• Never use the product in an environment subject to water, corrosive gases,
inflammable gases, or combustibles.
Failure to observe this caution may result in electric shock or fire.
• Do not step on or place a heavy object on the product.
Failure to observe this caution may result in injury.
• Do not cover the inlet or outlet ports and prevent any foreign objects from entering
the product.
Failure to observe this caution may cause internal elements to deteriorate resulting in mal-
function or fire.
• Be sure to install the product in the correct direction.
Failure to observe this caution may result in malfunction.
• Provide the specified clearances between the SERVOPACK and the control panel
or with other devices.
Failure to observe this caution may result in fire or malfunction.
• Do not apply any strong impact.
Failure to observe this caution may result in malfunction.