Yaskawa Sigma-5 User Manual: Operation of Digital Operator - Manual (Page 13)

xiii
„ Maintenance and Inspection
„ Disposal
„ General Precautions
CAUTION
• Do not disassemble the SERVOPACK.
Failure to observe this caution may result in electric shock or injury.
• Do not attempt to change wiring while the power is ON.
Failure to observe this caution may result in electric shock or injury.
• When replacing the SERVOPACK, resume operation only after copying the previ-
ous SERVOPACK parameters to the new SERVOPACK.
Failure to observe this caution may result in damage to the equipment.
CAUTION
• When disposing of the products, treat them as ordinary industrial waste.
Observe the following general precautions
to ensure safe application.
• The products shown in illustrations in this manual are sometimes shown without covers or
protective guards. Always replace the cover or protective guard as specified first, and then
operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the prod-
uct you received.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa repre-
sentative or one of the offices listed on the back of this manual.