KACO Powador XP100-HV - Manual (Page 20)

Page 20 Operating Instructions Powador XP100-HV
I n s t a l l a t i o n / S t a r t - u p
5.4 Start-up
The circuit breakers must be switched on to start up the inverter. The circuit breakers switch on the control circuits.
DANGER
Lethal voltages are still present in the terminals and lines of the inverter even after the
inverter has been switched off and disconnected!
Coming into contact with the lines and terminals in the inverter will cause serious injury or death.
Only authorised electricians who are approved by the supply grid operator may open, install and
maintain the inverter.
› Keep all doors and covers closed when the unit is in operation.
› Do not touch the lines and terminals when switching the unit on and off !
Switch on the circuit breakers (fi gure 11)
Circuit breaker Check Action
1. Circuit breakers CB30 to 35 ON  Proceed to Step 2
OFF  Switch on,
then proceed to Step 2
2. Circuit breakers MCB21 and MCB24 ON  Proceed to Step 3
OFF  Switch on,
then proceed to Step 3
3. External circuit breaker for line voltage  Switch on
 Start up the inverter