KACO Powador XP100-HV - Manual (Page 25)

Operating Instructions Powador XP100-HV Page 25
I n s t a l l a t i o n / S t a r t - u p
5.6 User interface (MMI)
The MMI has a graphic interface which you use to monitor and control the inverter. The MMI has the following
functional features:
• The LCD screen displays the operating states, along with voltages, currents, frequencies, temperatures, output
powers, status of errors/warning messages, and events. Pressing the MMI touch screen switches on the LCD
backlight. If the display is not activated within fi ve minutes, the LCD backlight switches automatically off .
• Touch screen for navigating through the menus SD card: the MMI continually records data to the SD card. When
recording once every 10 minutes (around the clock), the maximum amount of data per year is 360 KB. When the
SD card is full, the oldest data is overwritten.
• Confi guration of country-specifi c settings (power grid standard, maximum/minimum voltage/ frequency)
• Ethernet interface for monitoring and service, network connection for remote use
• RS485 interface for logging and transferring data
• USB interface for connecting external units (e.g. laptop computer)
8
7
6
5
4
3
2
1
Figure 14: Front of the MMI Figure 15: Rear of the MMI
Key
1 Protective cover 5 Ethernet interface
2 MMI touchscreen, LCD 6 RS232 interface (internal interface)
3 USB interface 7 RS485 interface
4 Power connection 8 SD card