KACO Powador XP100-HV - Manual (Page 35)

Operating Instructions Powador XP100-HV Page 35
I n s t a l l a t i o n / S t a r t - u p
Network
Confi gure the network for the MMI
 Select static and dynamic IP addresses via DHCP service requests.
 Change the Web port used for monitoring the inverter via the Web.
 Open the Web monitoring service using the MMI's IP address and Web port
(e.g. http://192.168.10.11:82).
Network
Confi g
IP
Netmask
Gateway
Web Port
Static
192.168.10.11
255.255.255.0
192.168.10.1
82
Set
Set
Set
Set
Set
Figure 33: “Network” screen
Software upgrade
If an update is available (for example, when new functions are added), use the SD card to update the inverter soft-
ware.
SAFE
NOTE
Do not remove the SD card until the SAFE icon is displayed so that it will be detected by the MMI
when you reinsert it.