3 the actions menu, 3 the actions menu -6 – Emerson E2 User Manual
Page 118
10-6
•
E2 RX/BX/CX I&O Manual
Status screen functions are explained in more detail in
Section 12, Operator’s Guide to Using the E2 of the man-
ual. For now, press
to access another important
screen: the Actions menu.
10.7.3 The Actions Menu
The Actions Menu is available from any status screen
by pressing Enter
, and may be used to do just about
any task in the E2 system software. This screen lists a
number of options that can be used to affect a selected
field, an entire application, or the E2 in general.
One of the more important features of the Actions
Menu is the Setup screen
(Setup). The actual setup
screen will vary, depending on where the cursor is placed
in the Main Status (Home) screen before
is pressed.
This is the easiest way to edit an existing application.
For more information on usage of the Setup screen and
how to implement its functions, see Section 12.11.1.2,
Setup Screens.
Key
Function for
RX
Function for
BX
Function for
CX
Suction Group
AHU
AHU
Condensers
Zones
Lighting
Standard and
Case Circuits
Lighting
Circuits
Sensor Control
and
Power Monitor-
ing
Sensors
Sensors
Setup
Setup
Setup
Table 10-2
- Status Screen Function Keys
Figure 10-10
- The Actions Menu
Actions Menu Item
Description
Graph
Opens graph view for the selected
value.
Log
Opens the Log screen of the
selected value.
Override
Opens the Override Update win-
dow where the selected input or
output can be overridden to a
user-defined value or state.
Expanded Information
Displays detailed information
about the selected value.
Setup
Opens the setup screen for the
selected value.
Detailed Status
Special status screen that shows
detailed setpoints and input/out-
put information with complete
summary of inputs, outputs.
Manual Defrost
For circuits only. Opens the Cir-
cuit Bypass screen to force a man-
ual or emergency defrost, or wash
mode.
Application Com-
mands
Allows Service Start/End for Irri-
gation and Pulse Accumulation
applications.
Applications Logs/
Graphs
• Opens various log and
graph screens for Anti-
sweat and Pulse Accumu-
lation applications.
• Opens the Circuit Report
screen for standard circuits
only.
Table 10-3
- Actions Menu Options and Descriptions