Emerson E2 User Manual
Page 230
C-8
•
E2 RX/BX/CX I&O Manual
IRLDS: Absorption Data Error
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: ADC Error
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: Data Error
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: Detector Data Error
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: Drift Fault
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: General Fault
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: Line/Filter Flow Fault
20
A zone on an IRLDS unit has a dirty filter or a
crimped tube.
IRLDS: Pressure Data Error
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: Self-Test Failure
20
An IRLDS has failed its self-test procedure.
IRLDS: Temperature Data Error
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
IRLDS: Unknown Error
20
The IRLDS has experienced an error not recognized
by the E2.
IRLDS: Voltage Data Error
20
An internal error has occurred in the IRLDS. Check
the IRLDS display for error code information, and
call Retail Solutions service.
ISD Missing Phase Lockout
20
After 10 consecutive missing phase trips, the com-
pressor is locked out on missing phase lockout.
ISD Missing Phase Trip
99
If any of the 3 phases of power is missing after the
compressor is called to be on, this advisory is gener-
ated.
ISD Oil Pressure Lockout
20
If we have been in Low Oil warning for 2 minutes we
will lock out the compressor.
ISD Welded Contactor
20
If there is voltage on the 3 phase sense inputs 0.5 sec-
onds after the compressor is called to be off, this
advisory is generated.
ISD Compressor Module Failure
20
A hardware failure has occurred in the ISD module.
Alarm Name
Default
Priority
Definition