Alarm, Alarm settings – PLANET VIP-191 User Manual

Page 94

Advertising
background image

-

If the quick dial number is single digit, just press and hold that digit, and the phone will dial out

that number associated with that digit.

-

If the quick dial number is double digit, just press the first digit, then press and hold the 2

nd

digit,

and the phone will dial out that number.

When your phone is displaying the list of quick dial entries, you can also make a call to the highlighted

number by pressing the OK or Right (“Dial”) Key.

Alarm

To launch the Alarm application, press the Left Key (“Menu”) from the Main screen, select

“*. Accessories”. Highlight “Alarm” and press the OK Key.

Alarm Settings

To set the alarm time, select “Alarm Setting” from the sub-menu, as shown below:

Figure 159. Alarm setting

Use the Up, Down, Backward and Forward keys to specify the date of the alarm. Press the OK Key to

jump to set the alarm time. Use the Up and Down Keys to adjust the hour. Press the Backward and

Forward Keys to move to the minute or AM/PM field. Pressing the OK Key at any time will allow you to

jump between the date and time fields.

When you have finished adjusting the alarm time, press the Left (“Turn On”) Key to activate the alarm.

You should also see a bell icon right below the signal strength in the Main Screen, as shown below:

Figure 160. Alarm icon

When the alarm goes off, you should be able to see a pop-up reminder similar to the following:

94

Advertising