Siemens MC35 User Manual

Page 134

Advertising
background image

AT Command Set

MC35_ATC_01_V03.02

Page 134 of 228

13.03.2002

2

SMS-DELIVERs, except class 2 messages and messages in
the message waiting indication group (store message) are
routed directly to the TE using unsolicited result code:
+CMT: ,<length><CR><LF><pdu> (PDU mode enabled)
+CMT: <oa>,, <scts> [,<tooa>, <fo>, <pid>, <dcs>, <sca>, <to-
sca>, <length>] <CR> <LF> <data>
(text mode enabled)

3

Class 3 SMS-DELIVERs are routed directly to the TE using
unsolicited result codes defined in <mt>=2. Messages of other
data coding schemes result in indication as defined in <mt>=1.

<bm>

Rules for storing received CBMs depend on the relevant data coding
method (refer to GSM 03.38 [2]), the setting of Select CBM Types
(+CSCB) and this value:
0

No CBM indications are routed to the TE.

2

New CBMs are routed directly to the TE using unsolicited re-
sult code: +CBM: <length><CR><LF><pdu> (PDU mode en-
abled) or +CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR>
<LF><data>
(text mode enabled).

3

Class 3 CBMs are routed directly to TE using unsolicited result
codes defined in <bm>=2.

<ds>

0

No SMS-STATUS-REPORTs are routed to the TE.

1

SMS-STATUS-REPORTs are routed to the TE using unsolic-
ited result code: +CDS: <length><CR><LF><pdu> (PDU mode
enabled)
or +CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>, <st>
(text mode enabled)

2

If SMS-STATUS-REPORT is routed into ME/TA, indication of
the memory location is routed to the TE using unsolicited result
code: +CDSI: <mem>,<index>

<bfr>

1

TA buffer of unsolicited result codes defined within this com-
mand is cleared when <mode> 1...3 is entered.

Unsolicited result
code

Syntax of responses output when SMS is received:
+CMTI: <mem>,<index>

Indicates that new message has been re-
ceived

+CBMI: <mem>,<index>

Indicates that new CB message has been re-
ceived

+CMT: ,<length><CR><LF><pdu> Short message is output directly

+CBM: <length><CR><LF><pdu>

Cell broadcast message is output directly

During each SMS or Cell Broadcast Messages the Ring Line will remain Logic “0“
for one second.

Advertising