Siemens MC35 - Manual (Page 156)

AT Command Set
MC35_ATC_01_V03.02 Page 156 of 228 13.03.2002
6.1.8 AT^SGAUTH Set type of authentication for PPP connection
Test command
AT^SGAUTH=?
Response
^SGAUTH: (list of supported <auth>s)
OK/ERROR/+CME ERROR
Parameter
<auth> indicates types of supported authentication
0 None
1 PAP
2 CHAP
3 PAP and CHAP
Read command
AT^SGAUTH?
Response
+CGACT: <auth>
OK/ ERROR/ + CME ERROR
Parameter
See test command
Write command
AT^SGAUTH=
<auth>
Response
OK/ ERROR/ + CME ERROR
Parameter
See test command
Reference
Siemens
Note