At+fmdl identify product model, At+fmfr request manufacturer identification, At+fopt set bit order independently – Siemens MC35 User Manual
Page 49: 16 at+fmdl identify product model, 17 at+fmfr request manufacturer identification, 18 at+fopt set bit order independently
Advertising
![background image](/manuals/139384/49/background.png)
AT Command Set
MC35_ATC_01_V03.02
Page 49 of 228
13.03.2002
3.16 AT+FMDL identify Product Model
Read command
AT+FMDL?
Send the model identification to the TA
Response
Gipsy Soft Protocolstack
OK
Reference
Siemens
Note
Used for Faxclass 2 only
3.17 AT+FMFR Request Manufacturer Identification
Read command
AT+FMFR?
Send the manufacturer identification to the TA
Response
SIEMENS
OK
Reference
Siemens
Note
Used for Fax class 2 only
3.18 AT+FOPT Set bit order independently
Write command
AT+FOPT=<opt>
Model specific command to set bit order independently of the understanding
which is "mirrored" and which is direct.
Response
OK
Parameter
<opt>
0 non-standard
1 standard
Reference
Siemens
Note
Used for Fax class 2 only
Advertising