Siemens MC35 - Manual (Page 166)

AT Command Set
MC35_ATC_01_V03.02 Page 166 of 228 13.03.2002
7.3 AT^SSTGI Remote-SAT Get Information
Test command
AT^SSTGI=?
Response
^SSTGI:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read command
AT^SSTGI?
Response
^SSTGI: <state>, <cmdType>
OK
Parameters
<state> Remote-SAT interface states (refer to AT^SSTA)
<cmdType> Ongoing Proactive Command
Write command
AT^SSTGI=
<cmdType>
Regularly this Write command is used upon receipt of an unsolicited result code
^SSTN:<cmdType>.
The TA is expected to acknowledge the ^SSTGI response with AT^SSTR to
confirm that the proactive command has been executed.
AT^SSTR will also provide any user information, e.g. a selected menu item.
The command type value is returned to the ME to identify which ^SSTN is being
responded to.
Reference
Siemens
Note