Siemens MC35 - Manual (Page 137)

AT Command Set
MC35_ATC_01_V03.02 Page 137 of 228 13.03.2002
5.12 AT+CSCA SMS service centre address
Test command
AT+CSCA=?
Response
OK
Read command
AT+CSCA?
Response
+CSCA: <sca>,<tosca> OK
Parameter
See write command
Write command
AT+CSCA=<sca>
[,<tosca>]
TA updates the SMSC address, through which mobile originated SMs are
transmitted. In text mode, setting is used by send and write commands. In PDU
mode, setting is used by the same commands, but only when the length of the
SMSC address coded into <pdu> parameter equals zero.
Note: This command writes the service centre address to non-volatile memory.
Response
OK
Parameter
<sca> GSM 04.11 RP SC address Address value field in string format; BCD
numbers (or GSM default alphabet characters) are converted into
characters; type of address given by
<tosca>
Maximum length of address: 20 characters
<tosca> Service centre address format GSM 04.11 RP SC address Type-of-
Address octet in integer format (default refer <toda>)
Reference
GSM 07.05
Note
If no parameter is entered after AT+CSCA= the content of <sca> will be deleted.