Siemens MC35 User Manual
Page 97
AT Command Set
MC35_ATC_01_V03.02
Page 97 of 228
13.03.2002
MC35 offers various options to verify the present status of network registra-
tion: For example, the AT+COPS? (Chapter 4.26) command indicates the
currently used network. With AT+CREG (Chapter 4.37) you can also check
the current status and activate an unsolicited result code which appears
whenever the status of the network registration changes (e.g. when the ME
is powered up, or when the network cell changes).
• Wait 10 seconds after PIN input before using SMS related commands.
• <pin> and <new pin> can also be entered in quotation marks (e.g. ”1234”).
• To check the number of remaining to attempts to enter the passwords use
the AT^SPIC command. See Chapter 8.30.
• See also Chapter 9.2 “Summary of PIN requiring AT Commands“.