Examples: phone lock, 2 examples: phone lock – Siemens MC35 User Manual

Page 76

Advertising
background image

AT Command Set

MC35_ATC_01_V03.02

Page 76 of 228

13.03.2002

32

data circuit async

64

dedicated packet access

128

dedicated PAD access

x

combination of some of the above classes.
For example, the default setting 7 represents the sum of the
integers 1, 2 and 4 (call barring for voice, data and fax). The
value 255 covers all classes. If the <class> parameter is
omitted, the default value 7 is used.

See examples in 4.18.3 for correct handling of class numbers.

<status> 0 off

1 on

Reference

GSM 07.07

Note

*# codes sent with ATD cannot be used to enter the Master Phone Code.

4.18.1 Examples: Enabling / disabling PIN 1 authentication

Example 1

To lock or unlock the SIM card: The "SC" parameter enables or disables the
SIM PIN authentication (PIN 1) when you power up the GSM engine:

AT+CLCK="SC",1,9999

Activates SIM card lock.

OK

As a result, SIM PIN 1 must be entered to en-
able ME to register to the GSM network.

AT+CLCK="SC",0,9999

Unlocks SIM card.

OK

When powered up, ME registers to the GSM
network without requesting SIM PIN1.
Note: Depending on the services offered by the
provider, this feature is not supported by all
SIM card types. If so, the command returns
ERROR when you attempt to unlock the card.

Example 2

To query the status of the SIM card lock:

AT+CLCK="SC",2
+clck: 1

SIM card is locked. SIM PIN1 must be entered
to enable ME to register to the GSM network.

4.18.2 Examples: Phone lock

Example 1

Be sure that PIN 1 authentication is valid:
AT+CPIN?

+CPIN: SIM PIN

OK

AT+CPIN=9999

OK

Advertising