Siemens MC35 User Manual
Page 170
AT Command Set
MC35_ATC_01_V03.02
Page 170 of 228
13.03.2002
Dedicated channel:
chann
traffic channel number
Note: <chann> = h indicates frequency hopping.
TS
timeslot no.
timAdv
timing advance in bits
PWR
current power level
dBm
receiving level in dBm
Q
receiving quality (0–7)
ChMod channel mode (S_HR: Half rate, S_FR: Full rate, S_EFR: Enhanced Full
Rate)
Reference
Siemens
Note
• If during a connection the radio cell is changed, the parameters LAC, Cell, NCC
BCC, PWR and RXLev of the ‘Serving Cell’ part will not be updated (see also
+CREG, pg 106).
• If the BS supports frequency hopping during a connection, the dedicated chan-
nel (parameter chann) is not stable. This mode is indicated by chann = ‘h’.
• As a result of this command the requested output may be issued by the ME at
any moment (related to <period>).
To indicate such unsolicited result codes to a connected application, the ME
usually activates it´s Ring Line (Logic "0") for one second. This is not true for
the unsolicited output of AT^MONI and AT^MONP.