Siemens MC35 - Manual (Page 167)

AT Command Set
MC35_ATC_01_V03.02 Page 167 of 228 13.03.2002
7.4 AT^SSTR Remote-SAT Response
Test command
AT^SSTR=?
Response
^SSTR:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read command
AT^SSTR?
Response
^SSTR: <state>, <cmdType>
OK
Parameters
<state>
Remote-SAT interface state
<cmdType> Ongoing Proactive Command
Write command
AT^SSTR=
<cmdType>,
<status>
[,<itemId>]
[,<inputString>]
The TA is expected to acknowledge the ^SSTGI response with AT^SSTR to
confirm that the proactive command has been executed.
AT^SSTR will also provide any user information, e.g. a selected menu item.
Response
OK
Parameters
<cmdType> Number related to Proactive command or event type
<status> Command status return regarding the type of action that has
taken place, e.g. action performed by the user.
<itemId> id of menu item selected by user
<inputString> string response entered by user
Reference
Siemens
Note