Siemens MC35 - Manual (Page 65)

AT Command Set
MC35_ATC_01_V03.02 Page 65 of 228 13.03.2002
4.8 AT+CEER Extended error report
Test command
AT+CEER=?
Response
OK
Execute command
AT+CEER
TA returns an extended error report of the reason for the last call release and
location.
Response
+CEER: <location ID>, <reason > , <ss_release>OK
Parameter
<location ID> Location ID as number code (see subclause 9.1.6)
<reason> Reason for last call release as number code (see subclause
9.1.6)
<ss_release> Release cause for last Supplementary Service Call
(see subclause 9.1.14)
Reference
GSM 07.07
Note
• AT+CEER is not available for data calls, please use ATS18=1.
• Default output in the case of a no-error-situation is +CEER: 0,0,0.