Siemens MC35 User Manual
Page 146
AT Command Set
MC35_ATC_01_V03.02
Page 146 of 228
13.03.2002
<PDP_type>
Packet Data Protocol type is a string parameter which
specifies the type of packet data protocol:
IP
Internet Protocol (IETF STD 5)
<APN>
Access Point Name is a string parameter (framed by
quotation marks) which is a logical name that is used
to select the GGSN or the external packet data net-
work. If the value is null or omitted, then the subscrip-
tion value will be requested.
<PDP_addr>
String parameter that identifies the MT in the address
space applicable to the PDP (e.g. IP V4 address for
PDP type IP). If the value is null or omitted, then a
value may be provided by the TE during the PDP
startup procedure or, failing that, a dynamic address
will be requested.
Response
OK/ERROR/+CME ERROR
Reference
GSM 07.07