Siemens MC35 - Manual (Page 35)

AT Command Set
MC35_ATC_01_V03.02 Page 35 of 228 13.03.2002
2.39 AT+GCAP Request complete TA capabilities list
Test command
AT+GCAP=?
Response
OK
Parameter
Execute command
AT+GCAP
Response
TA reports a list of additional capabilities.
+GCAP: <name>
OK
Parameter
<name> e.g.: +CGSM,+FCLASS
Reference
V.25ter
Note
+CGSM: The response text shows which GSM commands of the ETSI standard
are supported.
2.40 AT+GMI Request manufacturer identification
Test command
AT+GMI=?
Response
OK
Execute command
AT+GMI
Response
TA reports information to identify the manufacturer.
SIEMENS
OK
Reference
V.25ter
Note
See also ”AT+CGMI Request manufacturer identification”.
2.41 AT+GMM Request TA model identification
Test command
AT+GMM=?
Response
OK
Execute command
AT+GMM
TA reports one or more lines of information text which permit the user to identify
the specific model of device.
MC35
OK
Reference
V.25ter
Note
See also ”AT+CGMM Request model identification”.