Siemens MC35 - Manual (Page 197)

AT Command Set
MC35_ATC_01_V03.02 Page 197 of 228 13.03.2002
8.32 AT^SPLR Read entry from the preferred operators list
Test command
AT^SPLR=?
Response
TA returns the whole index range supported by the SIM.
^SPLR:
(list of supported <index>s) OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command
Write command
AT^SPLR=
<index1>[,
<index2>]
Response
TA returns used entries from the SIM list of preferred operators with <index> be-
tween <index1> and <index2>. If <index2> is not given, only entry with <index1> is
returned.
^SPLR: <index1>, <oper>
^SPLR: .....
^SPLR: <index2>, <oper> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<index1> location number to read from
<index2> location number to read to
<oper> string type; operator in numeric form; GSM location area identification
number
Reference
Siemens
Note
GSM 07.07: AT+CPOL