PIONEERPOS AT Commands G24-LC - Manual (Page 125)

Chapter 3: AT Commands Reference
April 15, 2008 G24-L AT Commands Reference Manual 3-61
The following table shows the +CPBS parameters.
Example
AT+CPBS=?
AT+CPBS: ("ME","SM","MT","ON","DC","MC","RC","EN","AD","QD","SD","FD")
OK
AT+CPBS="SM"
OK
AT+CPBS?
+CPBS: "SM",74,160
OK
AT+CPBS="MT"
OK
AT+CPBS?
+CPBS: "SM",74,660
OK
+CPBR, Read Phone Book Entries
This command recalls phone book entries from a specific entry number or from a range of entries.
If only one entry is specified, and that entry is empty, OK is returned. If a range of entries is
Table 3-33: +CPBS Parameters
<Parameter> Description
<storage> List of supported phone books and their storage IDs
AD
Abbriviated dialing numbers.
DC ME dialed calls list (+CPBW is not applicable for this storage).
EN SIM emergency numbers (+CPBW is not applicable for this storage).
FD SIM Fixed dialing phone book.
MC G24-L missed (unanswered received) calls list (+CPBW may not be applicable
for this storage).
ME
G24-L phone book.
MT Combined G24-L and SIM phone book.
ON SIM own numbers (MSISDNs) list (reading this storage is also available
through +CNUM).
QD
Quick dial phone book.
RC G24-L received calls list (+CPBW may not be applicable for this storage).
SD Service dialing numbers.
SM SIM phone book.
The default phone book is AD.
<pin2> Pin2 password, 4-8 chars.
<used> Integer type value indicating the number of used locations in the selected memory.
<total> Integer type value indicating the total number of entries in the selected phone book
memory.