PIONEERPOS AT Commands G24-LC - Manual (Page 398)

TCP/IP
4-30 G24-L AT Commands Reference Manual April 15, 2008
+MIPSETS=1,200 //Asking the G24-L to accumulate 200 bytes on socket 1 prior to
sending
+MIPSETS: 0
OK
+MIPSETS=2,400 //Asking the G24-L to accumulate 400 bytes on socket 2 prior to
sending
+MIPSETS: 0
OK
+MIPSEND=1,"444444"
+MIPSEND:1,1497
OK
+MIPSEND=2,"DD" //Passing data to the G24-L socket 2
+MIPSEND:2,1499
OK
+MIPPUSH=1 //Terminal asks the G24-L to flush the buffer in sockets 1 and 2
+MIPPUSH:0
+MIPPUSH=2
+MIPPUSH:0
+MIPCLOSE=1 //Terminal closes sockets 1 and 2
+MIPCLOSE:1
OK
+MIPCLOSE=2
+MIPCLOSE:2
OK
+MIPCALL=0 //Terminal hangs up the link
OK
+MIPSETS=1,120 //Asking the G24-L to accumulate 120 bytes on socket 1 prior to
sending
+MIPSETS: 0
OK
+MIPSEND=1,"444444" //Passing 3 bytes of data to the G24-L socket 1
Note: Size remaining in socket 1 buffer is 1497 bytes.
+MIPSEND:1,1497
+MIPPUSH=1 //At this point, the terminal can decide on flushing the remainder to
the stack
Xoff and Xon Example
In this example, it is assumed that the buffer size is 1500 and that some kind of error happened on
the protocol stack.
+MIPSEND=1,"A344343ABC343438980BC...AB4" //Passing data to G24-L socket 1
+MIPSEND:1,1200
//(Note: Size remaining in socket 1 accumulating buffer is 1200 bytes.)
+MIPSEND=1,"A344343ABC343438980BC...A23"
+MIPSEND:1,0 //(Note: No free space in buffer.)
+MIPXOFF: 1 //The G24-L detects that the accumulating buffer on socket 1 has no
free space to accumulate data and data cannot be sent to the protocol stack.
From this point on, the terminal is not allowed to send data until it receives the +MIPXON
command.
+MIPSEND=1,A344343ABC343438980BC...AB4//Terminal disregards the Xoff request of G24-L and keeps
sending //(Note: The terminal does not stop.)
ERROR 3