Nortel Networks NN43001-314 - Manual (Page 109)

Network using Uniform Dialing Plan 109
7 Provision the main office and Branch Office with a home location
code (HLOC) or multiple codes to terminate all calls that should
terminate on this system.
Table 11 "Main office and Branch Office HLOC provisioning - Main
office B and Branch Office B" (page 109)
lists main office and Branch
Office HLOC provisioning.
Table 11
Main office and Branch Office HLOC provisioning - Main office B and
Branch Office B
Create a DMI Create an HLOC
LD 86 LD 90
REQ new REQ new
CUST 0 CUST 0
FEAT dgt FEAT net
DMI 61 TRAN ac1
DEL 3 TYPE hloc
ISPN no HLOC 841
DMI 61
Repeat the above for all the main offices and branch offices.
8 Provision the main office to send all other LOCs to the IP network
without prefixes. These are going to a remote main office.
Table 12 "Main office B LOC provisioning for LOC to remote main
office system - main office A is LOC 842" (page 109)
lists main office
B LOC provisioning for LOC to remote main office.
Table 12
Main office B LOC provisioning for LOC to remote main office system
- main office A is LOC 842
Create an RLI Create a LOC
LD 86 LD 90
REQ new REQ NEW
CUST 0 CUST 0
FEAT rlb FEAT NET
RLI 51 TRAN AC1
ENTR 0 TYPE LOC
LTER no LOC 842
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.