Nortel Networks NN43001-314 - Manual (Page 356)

356 Maintenance and diagnostics
The CLIDVER report contains the CLID composed for the Branch User.
If the report is generated on the main office Call Server, the CLID is
composed as follows:
• If ESA is enabled in the Branch Office, the CLID is the same as the value
entered for the ESA Locator parameter in the CHG ZESA command in
LD 117 (see
Procedure 37 "Configuring the main office" (page 319) ,
step 5 ).
• If ESA is not enabled, the CLID is the same as the CLID entry composed
in LD 15 (see
Procedure 9 "Configuring ESN and MG 1000B zones"
(page 210) , step 1 ).
If the CLIDVER report is generated on the MG 1000B CP PM, the CLID
is the same as the CLID entry composed in LD 15 (see
Procedure 23
"Configuring the MG 1000B zone" (page 257) , Step 2 ).
Refer to Emergency Services Access: Description and Administration
(NN43001-613) for more information on this feature.
Print Branch Office zone information
LD 117 contains commands to view Branch Office zones at the main office
Call Server.
LD 117 Print zone information.
Command Description
PRT ZACB [<Zone>]
Print a table of Branch Office zone dialing plan entries.
PRT ZBW [<Zone>]
Print a table of zone bandwidth utilization.
PRT ZDES [<DESMatchString>]
Print a table of the zone description entries.
PRT ZDP [<Zone>]
Print a table of Branch Office zone dialing plan entries.
PRT ZDST [<Zone>]
Print a table of Branch Office zone time adjustment properties entries.
PRT ZESA [<Zone>]
Print a table of Branch Office zone Emergency Services Access
parameters.
PRT ZONE ALL Print zone information for all zones.
PRT ZONE 0-255 Print zone information for a specific zone.
PRT ZTDF [<Zone>]
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.