Nortel Networks NN43001-314 - Manual (Page 390)

390 Appendix C On-net dialing plan configuration examples
5 Configure HLOC in Customer Data Block.
>LD 15
REQ: CHG
TYPE: CDB
NET_DATA YES
ISDN YES
CLID YES
ENTRY <xx>
HLOC 501
6 Configure Virtual Trunk route.
>LD16
REQ NEW
TYPE RDB
CUST 00
ROUT 120
DES VTRKNODE51
TKTP TIE
VTRK YES
ZONE 101
NODE 51
PCID H323
ISDN YES
MODE ISLD
DCH 12
IFC SL1
INAC YES
—End—
Refer to IP Peer Networking Installation and Commissioning (NN43001-313)
for more information.
NRS configuration
To configure the NRS, do the following:
Step Action
1 Create H.323 endpoints: "MO", "BO".
2 Create Numbering Plan entries.
a. Choose type "UDP-LOC".
b. Add "504" for endpoint "BO".
c. Add "501" for endpoint "MO".
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.