Nortel Networks NN43001-314 - Manual (Page 85)

Adaptive Network Bandwidth Management 85
Procedure 2
Displaying CAC parameters for one or more zones
Step Action
1 Select IP Network > Zones from the navigator.
The Zones web page opens (see Figure 14 "Zones web page"
(page 66) ).
2 Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page opens, as
shown in
Figure 15 "Maintenance Commands for Zones web
page" (page 68) . This page lists all the configured zones and their
intrazone statistics by default.
3 Select Print Adaptive Network Bandwidth Management and CAC
Parameters (PRT ZCAC) from the Action drop-down list.
4 Select a zone from the Zone Number drop-down list, by doing one
of the following:
• Select ALL to print statistics for all zones.
• Select a specific zone number to display statistics for a specific
zone.
5 Click Submit.
The Maintenance Commands for Zones web page reopens,
displaying the statistics for the specified zone or zones. A blank
field indicates that statistic is either not available or not applicable to
that zone.
Figure 22 "Element Manager - CAC parameters" (page 86) shows
an example of the CAC parameters for all Zones.
—End—
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.