Nortel Networks NN43001-314 - Manual (Page 241)

Signaling Server software installation 241
3 Label the CD appropriately (for example, Signaling Server,
sse-x.xx.xx).
—End—
The Software CD-ROM must be readable in a standard CD-ROM drive. After
you create a CD from the CD image, the CD contains several directories
and files. If you cannot create a CD, please refer to the CD writer’s software
documentation.
Once the CD is created, you can use it to install new software or upgrade
software on an existing Signaling Server.
Installing the Signaling Server software
Before proceeding, you must complete Procedure 16 "Connecting and
powering up the Signaling Server" (page 235) .
If you are installing the software on a new Signaling Server, or If you
are upgrading the software, refer to Signaling Server Installation and
Commissioning (NN43001-312).
Upgrading the SIgnaling Server software
Use the Signaling Server Install Tool to upgrade the Signaling Server
software, refer to Signaling Server Installation and Commissioning
(NN43001-312)
To upgrade the Signaling Server software, the IP Phone firmware, and the
Voice Gateway Media Card loadware, select option a in the Main Menu of
the Install Tool (see
Install Tool Main Menu ). To upgrade only the Signaling
Server software, select option b in the Main Menu.
Refer to Signaling Server Installation and Commissioning (NN43001-312)
for more information on upgrading and rec-onfiguring the Signaling Server.
Signaling Server tools
See Procedure 18 "Viewing the Tools Menu" (page 241) to access the
options in the Signaling Server Install Tools menu.
Procedure 18
Viewing the Tools Menu
Step Action
Use this option to set the date and time on the Signaling Server. This is also
where you can reset the shell login names and passwords (if you forgot
them or simply want to restore the initial defaults).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.