Using the ip phones – Nortel Networks NN43001-314 User Manual

Page 281

Advertising

Using the IP Phones

281

(Optional) Disallow usage of Virtual Office. For more information
on the Virtual Office feature, refer to Features and Services
Fundamentals (NN43001-106-B1).

LD 11 Enable/disable Virtual Office (optional).

Prompt

Response

Description

REQ:

NEW CHG

Add new data, or change existing data.

TYPE:

a...a

Terminal type.

Type

for a list of possible responses.

CLS

(VOLA)
VOLD

Allow Virtual Office operation from this TN.
Deny Virtual Office operation from this TN.

CLS

VOUA

Allow Virtual Office login onto this TN using other
telephone (destination of Virtual Office login).

(VOUD)

Deny Virtual Office login onto this TN using other
telephone (destination of Virtual Office login).

Provision the Station Control Password (SCPW) if the Virtual Office
feature is desired in Local Mode due to LAN/WAN or main office
failure. See

Procedure 11 "Setting and changing the Station Control

Password Configuration" (page 216)

Perform a manual or automatic installation of the MG 1000B
IP Phone according to instructions in IP Phones Fundamentals
(NN43001-368).

WARNING

After all telephones are installed, perform a datadump
(using LD 43 or NRS Manager) on the MG 1000B Call
Server. Refer to the Communication Server 1000E:
Installation and Configuration NTP (NN43041-310).

Test the IP Phones for survivability using

Procedure 26 "Testing the

telephone for survivability" (page 278)

—End—

Using the IP Phones

An MG 1000B IP Phone is operational immediately after configuration. You
can learn more about its services by referring to

"Telephone Options" (page

282)

and to IP Phones Fundamentals (NN43001-368). You can also test the

telephone. Refer to

"Test Local Mode" (page 286)

Nortel Communication Server 1000