Nortel Networks NN43001-314 - Manual (Page 310)

310 Dialing plan configuration
For example, assume that the PSTN trunk is on route 18 and the
Customer number = 0.
>LD 86
REQ NEW
CUST 0
FEAT DGT
DMI 18
DEL 3
INST
Set to remove ZDP added in the main
office
CTYP LOCREQ NEW
CUST 0
FEAT RLB
RLI 18
ENTR 0
LTER NO
ROUT 18
…
DMI
18
…
Set according to associated SPN
pattern
2 Configure ESN Special Number and Digit Manipulation.
LD 90 Configure ESN Special Number and Digit Manipulation.
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15
FEAT NET Network translation tables
TRAN AC1 Translator – Access Code 1 (NARS/BARS)
Because the call is incoming to the Branch Office, AC1 is
triggered if INAC = YES in the Route Data Block for the Virtual
Trunk in LD 16 and the INTL call type is associated with AC1 in
NET_DATA of the Customer Data Block in LD 15.
TYPE SPN Special code translation data block
SPN x
…
x Special Number translation
Enter the SPN digits in groups of 3 or 4 digits, separated by a
space (for example, xxxx xxx xxxx). The SPN can be up to
19 digits long.
The maximum number of groups allowed is 5.
- FLEN (0)-24 Flexible Length
The number of digits the system expects to receive before
accessing a trunk and outpulsing these digits.
…
- RLI 0-999 Route List Index configured in LD 86 (see Step 1 )
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.