Nortel Networks NN43001-314 - Manual (Page 80)

80 Bandwidth Management
Field Title Field Definition
LD 117
equivalents
QoS Response Time
Increase (ZQRT) Bandwidth limit increment, as a percentage of
the QoS factor for the zone CHG ZQRT
QoS Response Time
Interval (ZQRTI) Time (in minutes) between bandwidth limit
increments CHG ZQRTI
Warning Alarm Threshold
(ZQWAT) A QoS value, which is lower than this value, but
higher than the Critical (Unacceptable) Alarm
Threshold, triggers a Major Alarm. CHG ZQWAT
Critical Alarm Threshold
(ZQUAT) A QoS value, which is lower than this value,
triggers an Unacceptable (Critical) Alarm. CHG ZQUAT
R Alarm Coefficient (CR) The R (Cr) coefficient is used to calculate the
QoS value for the zone. CHG CR
Packet Loss Alarm
Coefficient (CPL) The Packet Loss (Cpl) coefficient is used to
calculate the QoS value for the zone. CHG CPL
Delay Alarm Coefficient
(CD) The Delay (Cd) coefficient is used to calculate
the QoS value for the zone. CHG CD
Jitter Alarm Coefficient (CJ) The Jitter (Cj) coefficient is used to calculate the
QoS value for the zone. CHG CJ
Coefficient of QoS (CQoS) The Coefficient of QoS (CQoS) is used to
calculate the overall QoS value for the zone. CHG CQOS
Recent Validity Time
Interval (CACVT) Amount of time (in hours) for zone-to-zone
record validity. Once this interval expires,
records for unused zones are purged from the
tables. CHG CACVT
Configuration using Command Line Interface
You can also configure the Adaptive Network Bandwidth Management
feature using LD 117.
LD 117 - Configure Adaptive Network Bandwidth Management.
Command Description
CHG CACVT <Zone> <Interval>
Configure the zone-to-zone record validity time interval, where:
• Zone = 1-255
• Interval = 1-(48)-255
CHG CD <Zone> <Cd>
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.