Nortel Networks NN43001-314 - Manual (Page 218)

218 Main office configuration
3.01" (page 218) ) or overlays (see Procedure 12 "Configuring MG
1000B IP Phones at the main office using LD 11" (page 218) ).
—End—
MG 1000B IP Phone configuration
After the Branch Office zones and passwords are provisioned, provision the
MG 1000B IP Phones at the main office. These can be provisioned using
TM 3.01 (see
"MG 1000B IP Phone configuration using TM 3.01" (page
218) ) or LD 11 (see Procedure 12 "Configuring MG 1000B IP Phones at the
main office using LD 11" (page 218) ).
There is no automatic data synchronization between the main office
Call Server and MG 1000B Call Server. The technician must provision
the telephone on all pertinent Call Servers or MGCs. See
Using the
Import/Export facility in TM 3.01 and Copying and Pasting IP Phone Data
using TM 3.01 for details on easily transferring the data from the main office
to the Branch Office.
MG 1000B IP Phone configuration using TM 3.01
At the main office, TM 3.01 can be used to configure MG 1000B IP Phones.
Use Telephone Pages to configure the telephones to include the following:
• Terminal Type
• TN
• Customer Number
• Branch Office Zone
• Prime DN corresponding to the BUID
Refer to the Telephony Manager 3.0: System Administration NTP for details.
MG 1000B IP Phone configuration using LD 11
Use Procedure 12 "Configuring MG 1000B IP Phones at the main office
using LD 11" (page 218) at the main office to configure MG 1000B IP
Phones.
Procedure 12
Configuring MG 1000B IP Phones at the main office using LD 11
Step Action
1 Configure the Branch Office zones and dialing plan. See Procedure
9 "Configuring ESN and MG 1000B zones" (page 210) .
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.