Nortel Networks NN43001-314 - Manual (Page 364)

364 Appendix A Preprogrammed data
Flexible Feature Codes
Many administrative procedures use Flexible Feature Code (FFC) data.
Table 32 "Flexible Feature Codes" (page 364) lists the FFCs for the CS
1000E system.
Table 32
Flexible Feature Codes
FFC Prompt FFC Definition
ASRC *40 Automatic Set Relocation
AREM *42 Automatic Set Removal Code
ADMN *41 Administration Set Access Code
CFWA #1 Call Forward All Calls Activate
CFWD #1 Call Forward All Calls Deactivate
C6DS *70 6 Party Conference Code
HOLD #4 Permanent Call Hold
MNTC *43 Maintenance Access Code
PUGR *71 Pick-up Group Code
RDLN *72 Last Number Redial
RDST *73 Store Last Number Redial
RGAA *74 Ring Again Activate
RGAD *75 Ring Again Deactivate
RGAV *77 Ring Again Verify
SPCC #2/*80 Speed Call Controller Code
SPCU #3/*81 Speed Call User Code
SSPU *89 System Speed Call User Code
SDI ports
The minimum port configuration for the Branch Office is three SDI ports,
all of which are on the MGC.
Table 33 "Pre-configured SDI ports" (page
364) shows the default SDI port configuration. The value for "XX" is set on
the faceplate of the CP PM.
Table 33
Pre-configured SDI ports
TTY
Number Card Port Use Configuration
0 0 0 MTC/SCH/BUG XX/8/1/NONE
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.