Nortel Networks NN43001-314 - Manual (Page 357)

Call Server commands 357
Command Description
Print a table of Branch Office zone time adjustment properties entries.
PRT ZTP [<Zone>]
Print a table of Branch Office zone time adjustment properties entries.
Enable/disable Branch Office zone features
LD 117 contains commands to enable and disable features for the Branch
Office zones.
LD 117 Enable/Disable Branch Office zone features.
Command Description
ENL ZBR [<Zone>] [ALL] [LOC] [ESA] [TIM]
Enable features for the Branch Office zone. If no specific features are
specified, ALL is assumed.
DIS ZBR [<Zone>] [ALL] [LOC] [ESA] [TIM]
Disable features of the Branch Office zone. If no specific features are
specified, ALL is assumed.
View status of Branch Office zone at main office Call Server
LD 117 contains commands to view the status of Branch Office zones at
the main office Call Server.
LD 117 Display zone status.
Command Description
STAT ZONE [<Zone>]
Display zone status table
STAT ZBR [<Zone>]
Display status of Branch Office zones.
Change/print PVQ notification levels
The notification level can be changed on a zone-by-zone basis so that a
particular zone, such as a Branch Office zone, is monitored more closely
than others. LD 117 contains commands for changing and viewing the
notification level for a zone. For more information on PVQ, refer to
"Proactive
Voice Quality management" (page 188) and Converging the Data Network
with VoIP (NN43001-260).
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.