Nortel Networks NN43001-314 - Manual (Page 299)

Configuring the dialing plan for PSTN access to Branch Users in Normal Mode 299
A sample configuration is given in Appendix "Off-net dialing plan
configuration example" (page 405) .
Procedure 33
Configuring the main office
Step Action
1 Configure the ZACB property for the Branch Office zone.
LD 117 Define the zone Access Code handling for the Branch Office zone.
Command Description
CHG ZACB <zone> [ALL]|[<AC1|AC2> <AC1|AC2>]
Define the Access Codes used to modify local or long-distance calls
in the Branch Office to force all Branch Office calls to be routed
to the MG 1000B PSTN.
The ZACB and ZDP properties are used to configure the digit
manipulation behavior of the Branch Office zone (see
Step 2 ).
The ZACB property specifies which calls undergo digit manipulation.
The attribute can be configured in the following ways:
• CHG ZACB <zone>
In this configuration, dialing AC1 or AC2 does not trigger digit
manipulation. Branch Users’ calls are treated exactly the same
as those for main office users.
• CHG ZACB <zone> ALL
In this configuration, calls dialed with AC1 and calls dialed with
AC2 undergo zone-based digit manipulation. All Branch Users’
calls can then be routed to the MG 1000B PSTN.
For example, assume that AC1 = 1, AC2 = 2, and ZDP = 101. If
a Branch User dials "1 87654321", ZDP is inserted in the dialed
digits to form a digit string of "1 101 87654321". If a Branch User
dials "2 87654321", ZDP is inserted in the dialed digits to form a
digit string of "2 101 87654321".
• CHG ZACB <zone> AC1 AC2
In this configuration, only calls dialed with AC1 undergo
zone-based digit manipulation. All Branch Users’ calls dialed
with AC1 can then be routed to the MG 1000B PSTN.
For example, assume that AC1 = 1, AC2 = 2, and ZDP = 101. If
a Branch User dials "1 87654321", ZDP is inserted in the dialed
digits to form a digit string of "2 101 87654321". If a Branch User
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.