Nortel Networks NN43001-314 - Manual (Page 307)

Configuring the dialing plan for PSTN access to Branch Users in Normal Mode 307
Figure 112
NRS Lookup path for gateway endpoints
Figure 113
NRS Routing Entries window for selected endpoint
7 Click Add in the Routing Entries window to add a routing entry.
The Add Routing Entry window opens, as shown in Figure 114
"NRS Add Routing Entry" (page 307) .
Figure 114
NRS Add Routing Entry
8 Configure the numbering plan entries for the Branch Office. This
is usually set to the unique non-dialable number that identifies the
Branch Office, as configured in the ZDP property of the Branch
Office zone in LD 117 at the main office (see
Step 2 of Procedure
33 "Configuring the main office" (page 299) ).
The type of number configured in the NRS should be set to match
the type of number as configured in the main office.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.