Nortel Networks NN43001-314 - Manual (Page 28)

28 Overview
SSTD (NTAK03) not
supported n/a n/a
Card Option Mail not
supported n/a n/a
Standard Option 11C minimum vintages apply to all packs and daughter
boards.
Attempts to install unsupported CEMux packs or to configure an
unsupported application are blocked.
Support of CEMux requires CS 1000 Release 5.0 Softswitch software and
a Media Gateway Controller Card (MGC). It is supported by all MG 1000B
systems.
Features supported by Option 11C SIPE related to CEMux are supported in
MG 1000B, which includes support for nB+D by having single D-Channel
support trunk packs in separate MG1000Bs.
The TMDI D-Channel ISM used on small systems IS NOT included for the
CS 1000B. D-Channels configured or removed for TMDI cards increment
the existing large system software based DCH ISM. The maximum number
of D-Channels, which is 255, supported with CS 1000B in CS 1000 Release
5.0, matches that of the CS 1000M large systems.
For BRI, you must provision the MISP and the SILC/UILC in the same
IPMG. This is the only supported configuration.
Clock References
With CEMux support, you can configure digital trunks and clock controller
configuration in the IPMG. Each IPMG that contains a digital trunk card
requires a clock controller on that shelf. You cannot use Clock references
across IPMGs, and you can configure only one clock controller per shelf..
Main office hardware description
The main office must be one of the following systems:
• CS 1000E
• CS 1000M Cabinet
• CS 1000M Chassis
• CS 1000M HG
• CS 1000M SG
• CS 1000M MG
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2007, Nortel Networks
.